Baldwin P19 cross reference
Manufacturer numbers Baldwin lists P19 as the replacement for
Baldwin lists P19 as the replacement for these manufacturer part numbers:
| Manufacturer | Their part number |
|---|---|
| (manufacturer not verified) | 12131 |
| AMERICAN PARTS | 659 |
| AMERICAN PARTS | 92123 |
| APCO | AP107 |
| (manufacturer not verified) | BR36 |
| CARQUEST | 85123 |
| (manufacturer not verified) | P131 |
| (manufacturer not verified) | 1710913 |
| CO-OP | PL131 |
| (manufacturer not verified) | CN13 |
| COOPERS | G533 |
| CYCLONE | PM209 |
| DELUXE | 94 |
| DELUXE | WD94 |
| DEUTSCH | D4016 |
| DEUTSCH | P131 |
| (manufacturer not verified) | DX131 |
| DONALDSON | P779043 |
| (manufacturer not verified) | FF120 |
| (manufacturer not verified) | K131 |
| FORD MOTOR | C4RZ6731D |
| FORD MOTOR | CCICZ6731C |
| FORD MOTOR | R1AA |
| FORD MOTOR | R1L |
| (manufacturer not verified) | 5576065 |
| GOULD | P209 |
| GRAINGER | 4ZJK1 |
| GUD FILTERS | G533 |
| HASTINGS | LF209 |
| KRALINATOR | L936 |
| LEE | L131 |
| (manufacturer not verified) | OG15 |
| LUBER-FINER | LP131 |
| LUBER-FINER | P131 |
| (manufacturer not verified) | H10431X |
| (manufacturer not verified) | 1900375M91 |
| MICRO PORE | PM107 |
| (manufacturer not verified) | 1710913 |
| MOPAR | L5 |
| MOTORCRAFT | FL28 |
| PERRY | PL94 |
| (manufacturer not verified) | P131 |
| SHELL | S13 |
| STAY READY | SRP131 |
| TEXACO | T13 |
| (manufacturer not verified) | APF131 |
| (manufacturer not verified) | PF131 |
| (manufacturer not verified) | P131 |
| (manufacturer not verified) | S61CP |
| WINSLOW | CLPF131 |
| WIX | PC131 |
| WOODGATE | WGL554 |
Source: Baldwin Manufacturers' Cross-Reference, Form 560-24 (2024). Baldwin's published direction is manufacturer part → Baldwin replacement. This list shows what Baldwin published in 2024. It does not verify that the numbers interchange today.
Upgrade chains run one way: equipment spec'd with a newer filter number should not step back to the older one. Go by what the truck was spec'd with.
Always verify against the current OEM catalog before ordering. Cross references are a starting point, not a guarantee of fit.